Product Technical Spec.
Body Style:
Cylindrical bushing mounted
Reliability Indicator:
Not established
Overall Length:
2.460 inches
Body Diameter:
0.960 inches
Shaft Diameter:
0.250 inches
Shaft Length:
1.750 inches
Mounting Bushing Length:
0.380 inches
Body Length:
0.710 inches
Overall Diameter:
1.178 inches
Shaft Style:
Round, slotted
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
310.0
Maximum Starting Torque:
6.00 inch-ounces
Maximum Running Torque:
1.00 inch-ounces
Maximum Stop Torque:
128.00 inch-ounces
Nonturn Device Location:
At 3 oclock
Nonturn Device Radius:
0.359 inches
Fragility Factor:
Moderately rugged
Screw Thread Diameter:
0.375 inches
Screw Thread Series Designator:
Unef
Screw Thready Qty Per Inch (tpi):
32.0
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Standard bushing
Electrical Resistance Per Section:
200.0 ohms all sections
Rotary Actuator Travel In Angular Deg:
320.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-70.0/+70.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-70.0 to 70.0 all sections
Power Dissipation Rating Per Section In Watts:
1.5 7th secondary pattern
Power Dissipation Rating Per Section In Watts:
3.0 7th secondary finish
Power Dissipation Rating Per Section In Watts:
1.5 free air 2nd section
Power Dissipation Rating Per Section In Watts:
3.0 free air 1st section
Resistance Tolerance Per Section In Percent:
-5.0/+5.0 all sections
Resistance Tolerance Per Section In Percent:
-5.0 to 5.0 all sections
Actuator Travel Control Feature:
Stops
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
60.0 all sections
Standard Taper Curve Per Section:
A all sections
Test Data Document:
97942-579r644 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
6 turret
Item Name:
Resistor,trimmer
Cross Referenced Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
RTS7-8 286-6
